A compact 3 channel 20w/channel constant current LED driver with in-built RF receiver and Rako processor. For control of 3 channel constant current LED fittings with selectable outputs of 350, 500, 600 and 700mA. When used with 3 colour fittings each colour is allocated a channel and can be individually adjusted allowing complete colour mixing. Simple colour cycling is started/stopped using the raise/lower buttons in a Rako wallpanel or hand held remote. Controlled from any Rako Rakom device, e.g. RCM wall plate or Bridge interface units.
RAKO RLED20CC3
WIRELESS THREE CHANNEL (RGB) 20W/CHANNEL CONSTANT CURRENT LED DIMMER
Designed for use with 3 channel constant current LED fittings. Maximum wattage of 20w with a forward voltage range of 3-45V (equates to 13 x 1w LEDs per channel). Requires a suitable external d.c. power supply such as the Rako RAPSU48. Selectable current ratings of 350, 500, 600 and 700mA via jumper connectors.
Programmed using either an RCM RF wallplate or the RASOFT software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory. The RLED20CC3 dimmer can be controlled from any Rako transmitter such as RCM wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system. For more information on dimming LEDs refer to Rako's application sheet 'Controlling LED Lighting With Rako Dimmers and Modules'.
